CR300

Positioning: Precision crack chasing for clean, controlled repair channels.
Precision chasing: High-accuracy depth control follows the crack line, with precise width and depth, leaving a clean V-shaped or rectangular channel for repair material.
Crack-following: The blade tracks straight, curved, and irregular cracks, avoiding off-crack damage.
Low-vibration cutting: Optimized frame and vibration damping keep the cut steady — clean edges, no chipping, less hand chiseling before repair.
Ideal for: Designed for floor crack repair — clean, precise chasing improves repair quality and durability. A key tool in any crack repair process.

Technical Specifications

Machine series		CR Series
Machine model		CR 200	CR 300	CR 350	CR 450	CR 550	CR 820
Motor Specifications	Power source	Corded electric	Corded electric	Corded electric	Corded electric	Corded electric	Corded electric
	Rated input power	4 hp (3 kW)		5.4 hp (4 kW)
	Phases	1 ph		1 ph
	Voltage	220 V		380 V
	Rated current			6.6 A
	Frequency			145 Hz
	Power system	1P + N + E		3P + N + E
Grinding parameters	Working width	7.9 in (200 mm)	11.8 in (300 mm)	13.8 in (350 mm)	17.7 in (450 mm)	21.7 in (550 mm)	32.3 in (820 mm)
	Number of grinding discs	1		3
	Direction of rotation	Both directions	Both directions	Both directions	Both directions	Both directions	Both directions
	Grinding pressure
	Minimum speed of grinding disc
	Maximum speed of grinding disc	1500 rpm		2100 rpm
Operation Mode	Motor control type	Wired		Wired
Operation Mode	Travel mode	Manual push		Manual push
Dimensions of the machine	Length
	Width
	Height
	Weight
	Duct collection hose diameter
Dimensions of the transport packaging	Packaging length (Calc)
	Packaging width (Calc)
	Packaging height (Calc)
	Gross weight after packing (Calc)